Spreader Bar (inc. Central Pivot & Slick Pin)Spreader bar, including the central pivot and slick pin. To be used for the Oxford Elara only. All our spare parts come with a 12-month warranty.About the Oxford Elara Ceiling LiftThe Oxford Elara is the replacement to the now discontinued Oxford Voyager 420 ceiling hoist. The Oxford Elara Ceiling lift is designed for the next generation of care services. Single handed care is the future and the Oxford Elara has all the tools. The Oxford Elara has so many options, so many ceiling track solutions, it demands to be taken seriously. Whether your a Hospital, Residential Care home, respite, Accessible accommodation servicing disabled people, hotel or any supplier of services to disabled and venerable people, look no further than the Oxford Elara for all your lifting and handling requirements. The Oxford Elara has a configurable SWL (Safe Working Load) of 227 kg.Key Features- Unique Elara Chauffeur- Extensive Lifting Range - Choice of Spreader Bars- Quick Release Spreader Bar- Backlit LCD Screen- Intuitive User Controls- Power Save / Sleep Mode- Durable Hand Control- Safety Systems- Scale OptionConfigurationsConfigurable Safe Working Load Where intended use and safe working load limitations allow, the Elara (227kg SWL) can be configured to a choice of two lower lifting capacities providing installation flexibility where budgetary constraints are prohibitive. By reducing the lifting capacity, track lengths can span with fewer fixing points, leading to a reduction in installation time and labour costs.Possible Configurations of the Elara 227 KgThis Elara's SWL (Safe Working Load) can be configured to the following:- 100 kg- 150 kg- 200 kg- 227 kg..
Molift offers optional suspensions that fit new and existing hoists. The lightweight suspension bars come in many different user sizes and shapes. The bar is also easy for the caregiver to change or carry due to it's lightweight design. The three versions of the suspension bar are: 2-point, 4-point and 8-point. The 2 and 4-point versions also have three sizes: Small, Medium and Large. Please see the 'specs' (specifications) tab, for choosing the right suspension bar for you. ..
Oxford Advance 4 point spreader barOxford Advance hoist 4 point spreader bar gives the service user an extremely more comfortable sitting position. The oxford sling range compliment this excellent addition. Additionally, Oxford Advance hoist 4-point positioning cradle uses the Securi3 safety clip system and adjustment is made by rotating the cradle handle either down or up to obtain an upright or reclined position for the patient. This cradle is designed specifically for use with the Oxford Advance lift from the Professional series. Further details can be found on the Joerns website, select the following link for further details...
Slick Pin AssemblySlick Pin Assembly for the Oxford Elara Spreader Bar. All our spare parts come with a 12 month warranty. If you can not find what you are looking for please call the office on 01772 814555.About the Oxford Elara Ceiling LiftThe Oxford Elara is the replacement to the now discontinued Oxford Voyager 420 ceiling hoist. The Oxford Elara Ceiling lift is designed for the next generation of care services. Single handed care is the future and the Oxford Elara has all the tools. The Oxford Elara has so many options, so many ceiling track solutions, it demands to be taken seriously. Whether your a Hospital, Residential Care home, respite, Accessible accommodation servicing disabled people, hotel or any supplier of services to disabled and venerable people, look no further than the Oxford Elara for all your lifting and handling requirements. The Oxford Elara has a configurable SWL (Safe Working Load) of 227 kg.Key Features- Unique Elara Chauffeur- Extensive Lifting Range - Choice of Spreader Bars- Quick Release Spreader Bar- Backlit LCD Screen- Intuitive User Controls- Power Save / Sleep Mode- Durable Hand Control- Safety Systems- Scale OptionConfigurationsConfigurable Safe Working Load Where intended use and safe working load limitations allow, the Elara (227kg SWL) can be configured to a choice of two lower lifting capacities providing installation flexibility where budgetary constraints are prohibitive. By reducing the lifting capacity, track lengths can span with fewer fixing points, leading to a reduction in installation time and labour costs.Possible Configurations of the Elara 227 KgThis Elara's SWL (Safe Working Load) can be configured to the following:- 100 kg- 150 kg- 200 kg- 227 kg..
Oxford Dipper Pool Hoist with Spreader Bar - Stainless SteelPlease be aware - This the new Oxford Dipper stainless steel and has replaced the older model. The new stainless steel Oxford Dipper now comes with a 10-year life span instead of 7 years. We expect the original oxford dipper to be replaced fully by the end of September.IntroductionStephen Pritchard, Managing Director of AAL LTD is a full-time wheelchair user and is driven to supply a quality service at an affordable price. The Oxford Dipper Pool hoist is the most predominant hoist within the UK’s NHS hospitals, Care Centres, Private Residential Homes, Yachting & Sailing Clubs, Quaysides, Therapy &Swimming Pools and Health Centres which has a maximum SWL (Safe Working Load) of 22 Stone (140 kg).The Dipper uses a hydraulic pump to raise and lower service users and gives the support workers and service users peace of mind as it’s not reliant on electricity. To operate the hoist, simply pump the hydraulic pump using the handle to raise the user and to release, unscrew the black pump valve to slowly lower the service user.There are two variations of the Oxford Dipper Pool Hoist, the standard Oxford Dipper with spreader bar and the Oxford Dipper with Ranger seat. Both variations are available with an array of sockets to meet each individual customers specification.Oxford Dipper Pool hoist with Spreader BarThe spreader bar version is designed for service users who use a sling with loops to access the pool etc. The service user will access the pool via a wheelchair and wheel up to the spreader bar. The support person will fit the sling and once ready, raise the dipper by pumping the arm to a height that will enable the sling to be attached and thus raise the service user off the wheelchair. The user will then be suspended by the supporting sling, this person can then be safely lowered into the pool by unscrewing the black dipper release valve into the pool. Can you have both options on one Dipper? There are two types of Oxford Dipper boom extensions, the 6 point spreader bar and the Ski tube which is compatible with the Oxford Ranger Seat. The 6 point spreader bar is used with slings, slings with loops, not clips. The spreader bar is very easy to attached, it takes 2 minutes. The Ski Tube connects again, very easy. This enables the Ranger seat to reverse up to lift, connect and lift with ease within a few minutes. To demonstrate how easy it is to connect these attachments, we've created a couple of short videos for your convenience.Specifications Safe Working Load (SWL): 140 kg / 22 stBoom Length: 1498 mmHeight (socket A & B, boom lowered): 1422 mm Height (socket A & B, boom full elevation): 2108 mm Base of Seat Above Floor Level (socket A & B): 889 mmBase of Seat Below Floor Level (socket A & B): 914 mmHeight (socket C, boom lowered): 1572 mmHeight (socket C, boom full elevation): 2258 mmBase of Seat Above Floor Level (socket C): 1039 mmFeatures - 3 Floor Fixing Options- Use with almost any swimming pool- Safe Working Load (SWL) of 140 kg (22 st)- Spreader Bar and Sling option- Ranger Transporter optionHow do you connect the Oxford Dipper Spreader Bar?How do you connect the Oxford Dipper Ski Tube for the Ranger seat?How is the Dipper fitted to the floor? The Dipper comes with three (3) options. Socket A, B and C. The sockets are ergonomically designed to be fit for different materials and finishes enabling the Oxford Dipper to be installed in almost any pool side setting.Socket A for Oxford DipperTo fit the socket A, a 1 m sq cube of concrete is required as the minimum recommendation. If already installed, a 91 mm hole then needs to be drilled 350 mm deep. An accredited engineer will then install the sockets interior, casing and socket cap which will then sit flush with the floor.The Dipper then slots into the socket when in use and once the use has been completed or you wish to store away, simply slide the dipper out of the hole ensuring you have lowered the boom to its lowest point and with the dipper strap, secure the pump tightly to the mast. This will prevent damage to the mast, pump and release valve when transporting the dipper to storage.After use please ensure the dipper pump is lowered to its lowest possible position, this ensures that the chrome on the hydraulic pump remains oiled and rust free and therefore extending the service life of the hoist. Should the hoist not remain oiled, the chrome will become pitted and this will destroy the internal seals over a long period of time, a new hydraulic dipper pump costs approx. £500.00 exclusive of vat.Socket B for Oxford DipperSocket B is fitted and installed as shown in the picture above, socket B is primarily used in swimming pools which have a water channel around that outlines the perimeter of the pool. Socket B is a replica of socket A with an added base plate which adds additional bracing and support to the Oxford Dipper.The B socket plate is fixed into place with six 15 mm diameter expanding bolts of the rawplug type, for more information please see the socket construction as illustrated above.As with the A socket, the B socket is slightly below floor level and is fitted with a blanking plug. The blanking plug can be inserted into the hole when the Oxford Dipper is transported away for storage, this leaves a clean flush finish to the pool sides surface, minimising injury and maximising hygiene in the pool area. Socket C for Oxford DipperSocket C is surface mounted and stands proud of the floor by approx. 150 mm, this socket is used mainly where there is insufficient depth of concrete for sockets A or B. The C socket plate is drilled with four 15 mm rawplug type expanding bolts, the recommended minimum depth of concrete to enable an accredited engineer to install the hoist is 150 mm.Due to the protruding nature of the socket, socket C adds 150 mm to the overall height of the hoist and therefore alters the maximum height of the bottom of the chair to 1039 mm and the lowest position of the chair bottom below floor level to 764 mm. For more information, please see the illustration found above...
Oxford Dipper Spreader Bar Complete AssemblyThis Spreader Bar (Complete Assembly) is for the Oxford Dipper Pool Hoist. Be assured, all of our Spare Parts come with a 12 Month Warranty.If you need assistance call 01772 814 555, our team is here to help.About the Oxford DipperThe Oxford Dipper Pool Hoist is the most predominant hoist within the UK’s NHS hospitals, Care Centres, Private Residential Homes, Yachting & Sailing Clubs, Quaysides, Therapy &Swimming Pools and Health Centres which has a maximum SWL (Safe Working Load) of 22 Stone (140Kg). The Dipper uses a hydraulic pump to raise and lower service users and gives the support workers and service users peace of mind as it’s not reliant on electricity. To operate the hoist, simply pump the hydraulic pump using the handle to raise the user and to release, unscrew the black pump valve to slowly lower the service user. There are two variations of the Oxford Dipper Pool Hoist, the standard Oxford Dipper with Spreader Bar and the Oxford Dipper with Ranger seat. Both variations are available with an array of sockets to meet each individual customers specification...
Oxford Voyager Portable Extending Spreader BarThis 6-Point Extending Spreader Bar (with extending strap) is for the Oxford Voyager Portable Track Hoist. Be assured, all of our Spare Parts come with a 12 Month Warranty.If you need assistance, please call 01772 814555, our team is here to help. About the Oxford Voyager PortableThe Oxford Voyager Portable Hoist can be combined with the Easytrack and Easytrack FS system to form a unique lifting solution. The Voyager portable hoist is lightweight but has a high safe working load (SWL) of 200 kg. The soft start and stop functions enables the user to be transferred securely and comfortably. The Voyager Portable also has a lightweight design and can be easily stored or transferred. The battery on the Voyager Portable can be removed for charging, there is also an audible Low Battery Indicator...
Oxford Major 200 Spreader Bar (Small)This Spreader bar is for the Oxford Major 200 Hoist. Be assured, all of our Spare Parts come with a 12 Month Warranty. Click here to see a range of Major 200 Spare Parts.Spreader Bar Size: SmallAbout the Oxford Major 200The Oxford Major 200 is the perfect solution for both nursing and acute care environments. The Major 200 is available in both hydraulic and electric versions. The Major has an outstanding Safe Working Load (SWL) of 200 kg (31st) which allows the hoist to work in almost all settings. There are also three different sizes of spreader bar available for the Major 200 Paediatric (Small), Standard (Medium) and Large to ensure the service user is comfortable and feels safe. ..
Oxford Maxi 170 Spreader Bar AssemblyOxford Maxi 170 Spreader bar assembly. The Spreader bar when attached to the hoists boom, allows slings to be applied. Be assured, all of our Spare Parts come with a 12 Month Warranty. Click here to see a range of Maxi 170 Spare Parts.About the Oxford Maxi 170The Oxford Maxi 170 is designed to lift patients onto almost any nursing surfaces. The Maxi 170 has a lifting height of around 2 meters and a SWL (Safe Working Load) of 170 kg. Manoeuvring and storing the hoist is made easier due to the Maxi 170's compact frame. The hoists legs can be adjusted to fit around obstacles when hoisting a patient. The Maxi 170 is also available in either an hydraulic or electric version. The electronic version has an LCD battery level indicator (indicating when the battery is low and needs charging). ..
Oxford Maxi 180 Spreader Bar (Small)This Spreader bar is for the Oxford Maxi 180 Hoist. Be assured, all of our Spare Parts come with a 12 Month Warranty. Click here to see a range of Maxi 180 Spare Parts.Spreader Bar Size: SmallAbout the Oxford Maxi 180The Oxford Maxi 180 Electric Hoist has a maximum lift height of almost two metres from the floor. This makes the hoist perfect for nursing situations when the patients are required to be lifted onto all types of surfaces. The design and shape of the Maxi is compact allowing great manoeuvrability and storage options. Many Schools and organisations use the hoist to assist disabled adults and children to access trampolines with it's excellent height of 2150 mm. The Maxi 180 is only available in the electric version. ..
Oxford Midi 170 Spreader Bar AssemblyThis Spreader Bar Assembly is for the Oxford Midi 170. The Spreader Bar, when attached to the boom, allows slings to be connected. Be assured, all of our Spare Parts come with a 12 month warranty. Click here to see a range of Midi 170 Spare Parts.About the Oxford Midi 170The Oxford Midi 170 is a versatile hoist suitable for home and nursing environments. The Hoist itself offers a surprising performance, given its compact size and is perfect for environments where space is limited. The Midi 170 is also available in either an Electric or Hydraulic version. The Electric version has an LCD battery level indicator, notifying the user when the battery needs charging. The Midi 170 has a SWL (Safe Working Load) of 170 kg. The legs on the Midi 170 can be adjusted to enable access around objects like chairs or under beds. ..